Are MERV 13 filters bad for HVAC?

Filters within a MERV rating of 17-20 are almost never necessary in a residential home. A MERV rating of 13-16 is considered hospital level air quality, so it is unlikely your home needs any more than that.

Can I use a MERV 13 filter in my HVAC system?

Minimum Efficiency Reporting Values, or MERV, reports a filter’s ability to capture particles. Filters with MERV-13 or higher ratings can trap smaller particles, including viruses. Many home HVAC systems will have a MERV-8 filter installed as the default. … Be sure the HVAC filter is correctly in place.

What MERV rating can my HVAC handle?

The EPA recommends MERV ratings of 9-12 because it is the most effective at keeping your home’s air clean. A filter with this rating will prevent particulates as small as 1 micron from entering your HVAC system. This rating qualifies as HEPA (high-efficiency particulate absorption) level.

Are MERV 11 filters bad for HVAC?

A MERV 11 air filter has a higher efficiency rating. … In particular, using an air filter with a MERV rating that’s too high can damage the compressor, heat exchanger, and air conditioner coil. In most cases, a MERV 11 air filter isn’t too high for residential use.

IMPORTANT:  How much water do I have to run through a new filter?

Is MERV 13 too high for residential?

One factor to consider is air flow through the system. … In some cases, using an air filter that is too restrictive for your system may cause low air flow problems as well. MERV 13 is the highest MERV value safe for residential furnaces; the higher ratings are used primarily in commercial units.

How long do MERV 13 filters last?

For Merv 8, 11 and 13 filters, we recommend that you change your filter at least every 3 months, however changing your filter every 2 months provides better filtration which provides healthier and cleaner air in your home.

Is MERV 11 or 13 better?

A MERV 11 rated furnace filter can trap the majority of harmful contaminants that are present in the air. … A MERV 13 filter is capable of filtering out all particle impurities like dust, lint, pollen, mold, dust mites, pet dander, smog, and smoke. On top of this, it can also trap bacteria and viruses.

What does MERV 13?

MERV stands “minimum efficiency reporting value” and a filter receives a MERV rating as determined by the American Society of Heating, Refrigeration, and Air-Conditioning Engineers (ASHRAE). … A MERV 13 will trap less than 75% of air particles that are 0.3-1.0 micron in size (the coronavirus is 0.1 microns).

What is the difference between MERV 13 and MERV 14?

MERV rating 13-16

MERV 13-16 filters are capable of trapping 90% or more of particles in the 1.0-10.0 micron range. MERV 13 will prevent less than 75% of the 0.3-1.0 micron particles from passing through, MERV 14 will get up to 84%, MERV 15 up to 94% and MERV 16 can trap 95% or more of the smallest particles.

IMPORTANT:  Is it OK to cut air filters?

What is the difference between MERV 12 and 13?

MERV 10 – MERV 12 filters remove most 1.0 to 3.0 micron particles plus bigger ones. These include all those listed under MERV 8 filters plus pet dander, bacteria, most smoke/smog particles and most auto emission particles. MERV 13 – MERV 16 filters remove most . 3 – 1.0 micron particles plus bigger ones.

How often do you need to change a MERV 13 filter?

If you want good indoor air quality (IAQ), you need better filtration and that means a MERV-13 filter. But high-MERV filters also happen to be more expensive so changing them every 30 days is not the so good for your pocketbook. The good news with high-MERV filters, though, is that they usually hold more dirt.

What is the difference between MERV 8 and MERV 13?

MERV 8s will collect particles as small as three microns, which is an excellent choice for home owners. This is a good performance level for the average home. The MERV 13 can collect particles as small as . … They remove dust and allergens so well that they pack with dust much faster than a standard MERV 8.

Are Aerostar filters good?

Aerostar MERV 13 Pleated Furnace Filters

It’s suitable for people with allergies, and especially for the ones suffering from asthma. The efficiency of this product is mainly because of the high MERV rating and its sturdy construction.

What MERV rating does Rheem recommend?

4. What MERV rating does Rheem recommend? Rheem recommends filters of MERV 8 and above. This MERV level is strong enough to remove substances like pollen, dust mites, dust and pet dander from the air.

IMPORTANT:  Best answer: How many times should I run water through a new filter?

What MERV rating does Trane recommend?

Clear The Air’s Trane Perfect Fit Merv 13 filters are the best possible choice in residential HVAC filtration.