Best answer: Can I use a 1 furnace filter instead of 4?

While a 4-inch-thick filter is more efficient than a 1-inch filter, the right size depends on your furnace. If you measure the filter slot, and it’s large enough to accommodate the thicker filter, then you can use it. However, if the slot is less than 4 inches wide, you’re stuck with using that thickness.

Can I use a 1 inch furnace filter instead of a 4 inch?

Question: Can i use a 1 inch filter instead of 4 inches? Answer: If you are okay with more frequent replacement and little stress on the system, 1” filter can be budget-friendly alternative of 4” filters.

What happens if you use a smaller furnace filter?

The filter can be sucked into the ventilation if it is much smaller than it should be. … The filter will be unable to protect your AC/HVAC unit and the unfiltered air will collect on internal components of your system, such as the coil and fan, which can lead to expensive repairs.

IMPORTANT:  You asked: How do you manually purify water?

Can I use a different size filter in my furnace?

The actual size is what you’d find if you used a ruler to measure the exact dimensions of the filter. Actual sizes vary slightly depending on the brand, but in most cases, any standard size will work in a standard residential unit.

Can I use a 2 inch filter instead of 1 inch?

As you can see the 2 inch filter will serve our needs MUCH better than the 1 inch filter. Even if the duct system is in good shape, using this filter will keep the system from struggling.

Can I use 4 1 inch filters instead of a 4 inch filter?

While a 4-inch-thick filter is more efficient than a 1-inch filter, the right size depends on your furnace. If you measure the filter slot, and it’s large enough to accommodate the thicker filter, then you can use it. However, if the slot is less than 4 inches wide, you’re stuck with using that thickness.

Does thickness of furnace filter matter?

The Thicker, the Better

Furnace filters can range anywhere from 1″to 5″ in thickness. In general, the thicker the furnace filter is the more efficiently your unit work and the longer it will last.

Can I use a 1 inch filter instead of 5?

Going down in thickness by an inch shouldn’t be a big deal – for example, you should be able to use a 4-inch filter instead of a 5-inch filter. … A 1-inch filter with less surface space will get clogged fairly quickly and need to be replaced much sooner than a thicker filter.

Do air filters have to be exact size?

Since air filters are most often sold by their nominal dimensions, it is crucial to learn how to properly measure your air filter. When making your purchase, you should order your filter by its nominal size, rather than its actual size.

IMPORTANT:  Do you need a special tool to change a fuel filter?

Is it OK to use a smaller air filter?

An improperly sized air filter doesn’t do its job. When it’s too small, it lets dust, mold, and other contaminants into your air vents. These then spew into your air, providing air quality problems.

Can I use 2 filters in my furnace?

Bottom Line: Putting two filters will not make it last longer but may make you have to replace it earlier, assuming it doesn’t already reduce air flow too much with just the filters.

What happens if you use the wrong size air filter?

When you use the wrong size air filter, or you install it incorrectly, the filter can’t effectively prevent dust from accumulating on the system’s motors and blowers. You’ll end up with a dirty furnace that can’t properly perform, and all of that debris could end up harming the system’s internal components.

Is a 5 inch furnace filter better than a 1 inch?

Replacing your standard one-inch air filter with a pleated 5-inch filter can result in better air quality inside your home. That’s because bigger air filters feature higher MERV ratings, leading to better filtration of pollutants and allergens.

How often should you change 4 inch furnace filter?

In general, this is how often changing furnace filters needs to be done: For 1- to 2-inch filters, replace them every 1 to 3 months. For 3- to 4-inch filters, replace them every 6 to 9 months. For 5- to 6-inch filters, replace them every 9 to 12 months.