First of all, you do not need to worry, this is a message indicating that the fuel water separator needs to be drained. Minimize driving until you can service the system to avoid water-related damage or contamination.
What causes water in fuel filter?
Water is commonly found in diesel fuel due to many factors including condensation in fuel tanks, improper handling and environmental conditions. To minimise the damaging effects, water should be removed from diesel fuel prior to the final stages of solid particulate filtration.
What does water in fuel drain filter mean?
Water buildup in the water separator that isn’t drained will cause corrosion to the housing. This corrosion will spread to different parts of your fuel system including the engine. A simple fix is to drain this water when the “Water in Fuel” light illuminates and periodically install a new secondary fuel filter.
What happens when water gets in fuel filter?
A fuel filter acts as a hurdle for the water to enter the vehicle’s engine from the fuel tank. However, the filter can lose its efficiency due to the water getting stuck inside it. In such a scenario, replacing the old fuel filter with a new one can be helpful.
Does water in fuel damage engine?
The short answer is yes: putting water in your fuel tank will most certainly destroy, or at least severely damage your engine.
What does water in fuel mean?
First of all, you do not need to worry, this is a message indicating that the fuel water separator needs to be drained. … Minimize driving until you can service the system to avoid water-related damage or contamination.
Will a fuel filter stop water?
no, your fuel filter will not stop water.
How does a water in fuel sensor work?
The Water in Fuel Sensor or WiF sensor indicates the presence of water in the fuel. It is installed in the fuel filter and when the water level in the water separator reaches the warning level, the Wif sends an electrical signal to the ECU or to dashboard (lamp).
How often should you drain your fuel filter?
They usually require a change every 10,000 to 15,000 miles whereas a modern gasoline fuel filter could go 100K+ miles before a change is needed – if at all.
How can you tell if you have water in your gas tank?
What are the symptoms of water in the gas tank? A good indicator is a sudden change in the performance of your vehicle. You try to accelerate and the car hesitates or sputters consistently. You try to get up to highway speeds and the car just doesn’t want to cooperate.
Can you drive with fuel filter light on?
Is it safe to drive with the fuel filter warning light on? While it’s not an emergency when the light first comes on, it is important that you get the filter drained as soon as possible. Waiting too long will let the water build up and eventually let it get to your engine where it can cause some serious damage.
How can you tell if you have water in your diesel?
If you think your diesel has been contaminated with water, some telltale signs to watch for include:
- A loss of RPM and power in the machine.
- Rough starting or erratic idling.
- Trouble or a lag in acceleration when stepping on the pedal.
- Abnormal exhaust such as white smoke.
Can you drive with water in fuel?
Water can cause corrosion inside your fuel system and injectors and keep them from monitoring your fuel delivery rate properly. If left long enough, your injectors can eventually fail altogether, meaning your car won’t start at all. This, obviously, is bad news.
Does water in fuel ruin fuel pump?
Water in the fuel tank has no positive aspects–only negative. It will rust the interior of the fuel tank, clog up lines, foul the fuel filter, ruin the electric fuel pump if it is submerged in it and is catastrophic to fuel injectors if sufficient water is in the tank and makes it to the injectors.
What is the best fuel treatment for water in gas?
Heet is the industry standard if you need an additive to remove the water from your gas tank. Not only is ISO-HEET a gas anti-freeze, but it can remove up to 5x the water as other additives.