How often should furnace air filters be changed?

In general, this is how often changing furnace filters needs to be done: For 1- to 2-inch filters, replace them every 1 to 3 months. For 3- to 4-inch filters, replace them every 6 to 9 months. For 5- to 6-inch filters, replace them every 9 to 12 months.

How often should you change your furnace filter in the winter?

Professionals, like our team at Airco Service, Inc. say that you should change your air filter at least every three months. During the winter, when you rely on your heating system more, you want to increase that frequency. During the winter, when the system is in constant use, change it out every month.

How can I tell if my furnace filter needs changing?

The best test to know if a furnace filter is ready to be changed is to hold it up to a bright light . If you can still see light through the filter then air is still getting through the filter. If you suspect the filter is dirty enough to restrict the air flow, then change it out to a new filter.

IMPORTANT:  How long does it take an air purifier to clean a room?

What happens if you dont change furnace filter?

Short Cycling

If the air filter is not serviced often enough, it will eventually become clogged to the point that air cannot pass through it. When the furnace is operating, the lack of air flow will trap the heat in the system. … Without a new air filter, the furnace will overheat every time it starts up again.

Should I change my furnace filter every month?

The basic consensus among HVAC professionals is that you should replace your furnace filter every 90 days — or every three months. However, that depends on the filter’s thickness. Thicker filters have more room to collect dirt and dust, so they don’t have to be changed as often.

Can you vacuum furnace filters?

Vacuuming your furnace filter will remove the build up of dirt and dust that impedes airflow through your system and increases your cooling systems run time. Vacuuming your furnace filter will not likely extend the life of your filter though.

Why does my furnace filter get dirty so fast?

Leaky Duct Work

According to ENERGY STAR, a typical house loses 20-30% of air through leaks in the duct work and poor duct connections. Leaving these untreated can not only kill your furnace filter quickly, but also result in higher energy bills.

What are the signs of a dirty air filter?

8 Dirty Air Filter Symptoms: How to Know When to Clean Your Air…

  • Air Filter Appears Dirty. …
  • Decreasing Gas Mileage. …
  • Your Engine Misses or Misfires. …
  • Strange Engine Noises. …
  • Check Engine Light Comes On. …
  • Reduction in Horsepower. …
  • Flames or Black Smoke from Exhaust Pipe. …
  • Strong Fuel Smell.
IMPORTANT:  You asked: Why do I need to change my furnace filter so often?

Why are my air filters so dirty?

Ducts that have holes, gaps, or leaks should be sealed up properly to prevent good air from getting out and bad air from getting in. If there is a leak in the return air ducts, the dusty, dirty air from spaces like that attic or crawl space gets sucked up into the ducts, dirtying the air filter and causing clogging.

Which side of furnace filter should be dirty?

In all cases, the furnace filter should be dirty on the side that the air comes into the furnace from. If your air filters are dirty in some other fashion, it is likely your furnace is not working properly, or the filter was installed incorrectly.

Is no air filter better than a dirty one?

Running your air conditioner without a filter is worse than running it with a dirty one. Instead, get to the store as soon as possible for a replacement or call an HVAC professional for replacement. Without a filter, your air conditioner is at risk for severe and expensive problems.

What problems can a dirty furnace filter cause?

Furnace Issues Caused By Dirty Air Filters

  • Damage to the Heat Exchanger.
  • High Heating Bills.
  • Poor Indoor Air Quality.
  • Clogs May Cause the Furnace to Shut Down.
  • Inability to Reach a Comfortable Temperature.

Can a dirty filter break a furnace?

A dirty furnace filter restricts airflow to the furnace, leading to higher energy spending, poor heating performance, and even a potential heating breakdown. … Your furnace may break down well before its expected lifespan and you’ll probably notice reduced heating in one or more areas of the house.

IMPORTANT:  Can a dirty air filter cause Underboost?

How often should Merv 8 filters be changed?

The basic recommendation for furnace filters replacement is every 3-4 months for MERV 8, every 6 months MERV 10 and 11 and every year for MERV 16. There are other several factors to consider when determining when to change your home air filter.

How much does a furnace filter cost?

Although flat filter designs offer the most savings upfront, they need to be replaced more frequently and may cost you more in the long run. Replacing these filters can cost anywhere from $40 to $200 a year.