Your question: Can a HVAC filter be too big?

If you purchase a filter that’s too large, it won’t slide into the slot correctly. If the filter is too small, it won’t cover the entire space and may allow dust and dirt to flow past.

Can I use the wrong size air filter?

An improperly sized air filter doesn’t do its job. When it’s too small, it lets dust, mold, and other contaminants into your air vents. These then spew into your air, providing air quality problems.

Can I use a bigger filter in my furnace?

In Summary

A furnace filter that is either too small or too big for your furnace will allow air to pass by the filter. But too thick of a density will risk blockages to airflow and can greatly increase the necessary energy and the associated costs.

Can I use a 4 inch furnace filter instead of 5?

Going down in thickness by an inch shouldn’t be a big deal – for example, you should be able to use a 4-inch filter instead of a 5-inch filter. … Higher MERV ratings work best when the filter is 4” thick or thicker because they trap extremely small particles, which means contaminants will build up quickly on the screen.

IMPORTANT:  Frequent question: Can you bleach a water filter?

How should HVAC filters fit?

The opening behind the grate covering the furnace filter will typically be a basic square or rectangle shape. AC filter sizes will vary. Your air vent filter size should match exactly to slightly smaller than the measured outside length and width of the frame around that opening.

How tight should an air filter fit?

How tight should a Furnace Filter fit? When you remove the existing filter, take note of the dimensions printed on its frame. Your new filter will need to match this size for the system to run efficiently. It should fit snugly but not so tight that you can’t easily slide the filter in and out.

Can I use a smaller AC filter?

For most systems you can use a standard sized filter within 5/8-in smaller than the air filter housing. If you are not able to find a standard sized filter within that parameter, you will need to order a custom sized air filter.

Can an air filter be too thick?

If you get a filter with pleats that are too thick, your filter could get dirty quickly. Thus, making your AC unit work harder than it needs to. A good benchmark to follow when considering MERV ratings is that if it’s more than 13, the pleats are most likely too thick for your filter.

Is MERV 13 too high for HVAC?

Filters within a MERV rating of 17-20 are almost never necessary in a residential home. A MERV rating of 13-16 is considered hospital level air quality, so it is unlikely your home needs any more than that.

IMPORTANT:  Does refrigerator ice maker have a filter?

Is MERV 13 too high for residential?

One factor to consider is air flow through the system. … In some cases, using an air filter that is too restrictive for your system may cause low air flow problems as well. MERV 13 is the highest MERV value safe for residential furnaces; the higher ratings are used primarily in commercial units.

What if my air filter is too big?

Air Filter Problems with Poor Fit

If you purchase a filter that’s too large, it won’t slide into the slot correctly. If the filter is too small, it won’t cover the entire space and may allow dust and dirt to flow past.

Can I use a 2 inch filter instead of 4?

For the same length and width, you can get 1 inch, 2 inches, 4 inches and even thicker. And all of them will fit your furnace.

Does furnace filter size matter?

Does Size Matter? You’ve guessed it! The answer is yes. It is essential to use the right size air filter for your HVAC unit to keep your system running smoothly and to reap all the benefits your air filter has to offer.

What happens if air filter is backwards?

By installing your filter backwards, air will have a harder time flowing through the filter and your air handler will have to work harder to make up for the loss of airflow. This could lead to higher utility bills and possibly damage your furnace or air conditioner.

How do you know what size air filter you need?

Follow these 3 easy steps to measure your HVAC filter size:

  1. Step 1 – Measuring Length and Width (L x W). (If your filter is not a square, the smallest measurement goes first).
  2. Step 2 – Measure the thickness (Depth) of your filter from front to back.
  3. Step 3 – Put Your measurements together (L x W x D).
IMPORTANT:  How do I find my air conditioner filter?