Your question: Why do furnace filters have arrows?

If you’ve picked up a new furnace filter that has an arrow stamped on its side, it’s good to know that it’s there to help you put the filter in correctly. Filters make a big difference in HVAC systems because they keep much of the dirt and dust out of the air handler or furnace compartment.

Does the arrow on a furnace filter go up or down?

The arrow must face toward the furnace and away from the return duct that pulls the air in need of heating or cooling. It’s smart to draw the airflow direction arrow with a permanent marker on the furnace or ductwork. … The arrow on the filter should always point toward the furnace.

What happens if furnace filter is in backwards?

When a furnace filter is placed backwards, the fibers can’t do their job properly. This means your furnace has to work harder to generate the same air flow, resulting in increased energy costs. Particles are also allowed to build up irregularly, making the furnace working even harder to draw air.

IMPORTANT:  What is the efficiency of HEPA filters?

How do I know which way the airflow is on my furnace?

If you are looking at a furnace filter, find the arrow that indicates the proper air flow direction. That arrow must always face toward the furnace and away from the return duct that carries the air in need of heating or cooling.

Which way should the airflow arrow point?

Position the airflow arrow so that it points in the direction the air is flowing. In addition to clean air, filters also protect your HVAC system from debris and dirt buildup. The airflow arrow should point towards the furnace/blower motor to collect harmful particles before it reaches the furnace’s equipment.

Is it OK to run the furnace without a filter?

Technically, you can temporarily run a furnace without a filter. However, it’s important to emphasize the word “temporarily” here. … Poor air quality: For one, not having a filter in place means there is nothing to prevent dust and debris from being sucked into your furnace and recirculated throughout your home.

Which way does the arrow point on an air filter?

Air filters have arrows printed on the sides of them that show you which way they are supposed to be installed. These arrows should be pointing in the direction that air flows through your system, which is away from the supply ducts and (typically) toward the blower.

How does air flow from one place to another?

Air is a fluid just like water. It also flows from one area to another because of adifference in pressure: In the open air, air flows from a higher pressure to a lower pressure. Wind is air that is moving from a higher pressure area to a lower pressure.

IMPORTANT:  You asked: Can you wash a dry air filter?

How often should furnace filters be changed?

In general, this is how often changing furnace filters needs to be done: For 1- to 2-inch filters, replace them every 1 to 3 months. For 3- to 4-inch filters, replace them every 6 to 9 months. For 5- to 6-inch filters, replace them every 9 to 12 months.

Why is the furnace blowing cold air?

Therefore, your furnace blowing cold air could result from a clogged or dirty air filter. If you have a dirty or clogged furnace filter, the cool air from inside your home will struggle to travel past through it and into the furnace. This means you have insufficient air to heat and redistribute.